<menu id="bzpjm"></menu>

    <nav id="bzpjm"></nav>
  1. <th id="bzpjm"><strike id="bzpjm"></strike></th>

    <progress id="bzpjm"></progress>

    <progress id="bzpjm"><legend id="bzpjm"></legend></progress>

    Home  /  Service & Support / Xixun Brief Manual

    Xixun Brief Manual

    XIXUN Brief Manual, LED Control System, XIXUN system configuration, LED control software

     

    LeemanDisplay is specialized in LED display R& D, production and manufacturing companies, we are committed to providing customers with a variety of ? LED Display Solutions ? , and to provide you with quality products pre-sales, after-sales service.


    1. System Topology


    1.1 Hardware connection

    Hardware connection is illustrated with the image 1-1 below:

    201405081011090391.jpg

    ① Connecting control card with HUB by flat cable firmly;
    ② Connecting HUB J1 port with input port of LED screen by flat cable; 
    ③ Accessing to power line and network; 
    ④ After the control card is connected power, all the indicator lights (power, network and working )are to turn on and the working light is twinkling, which means that the control card is operating normally.

     

    1.2 Computer and Control card connection

    Connecting computer with led screen by internet cable, as follows 1-2.

    201405081014412735.jpg

    2. Operating Environment and software installation

     

    2.1  Operating Environment

    Operating system: Simplified Chinese, Traditional Chinese or English WINDOWS XP,Vista.
    Hardware Configuration: CPU:Pentium 600MHz or above; ROM: 512M; Graphics card: Standard VGA 256 mode or above.
    Related Software: Microsoft Media Player – compulsory.

     

    2.2 Software installation –LED set2.0 and Led editor

    2.2.1 "LED Editor"software

    Firstly put the "LED Editor" installation CD into the CD-ROM, then the Installation menu will automatically pop up, (If not, please select this CD-ROM and double-click it).Secondly, as Figure2-2 shows, select “LED Editor_Setup.exe” and operate the software installation as the installation guide.


    After "LED Editor"software has been successfully installed, there will be a "LED Editor" short-cut on your desktop, and users can start the program by double click on the icon.

     

    2.2.2  "LED set2.0"software

    The software has been set before shipment by us, so no details are available here. As to he installation procedure,please refers to that of software <Led Editor>

     

    3. Special Notes and Computer Parameter Setup

     

    3.1 Set up computer's IP address

    If LED Set2.0 can automatically detect the IP address, this step can be ignored. If not, manual setup is needed. Specific steps are as follows: Right click “Network Neighborhood”, choose “Properties”, open “Network Connection”, then right click “Local Connection” and choose “Properties”(see Image 3-1 below)

     

    Please set up IP according to the notes in image 3-1, then click on"Property"button, a dialogue box will appear, as shown in image 3-2

    After finishing all the settings, please click “ok” .Note the setting of IP address is subject to 192.168.0.210.

     

    3.2 Check LED Screen IP address in <LED Editor>

    Click”Help” button in the menu bar of the <<LED Editor>> software, then choose “Auto check LED sign IP” in the list to bring out a dialogue box. , as shown in Image3-3 and Image 3-4 below. And you can view the LED screen IP address in Image 3-4.

     

    201405081048069453.jpg

    201405081058244610.jpg

    201405081420113828.jpg

    201405081404262110.jpg

    201405081402588360.jpg

    201405081412368516.jpg


    Contact Us
    Follow Us
    Nichia CREE EDison BARCO Linsn Technology Leeman Nationstar Daktronics Leeman MW
    Novastar Epistar Leeman LED Kinglight Lumileds Philips Osram Vdwall

    狠狠干日日射夜夜插综合